Reverse Osmosis Versus Other Water Filtration Methods

If you are considering various types of water filtration methods and systems for your home, it is important to understand how each one of these works. Some people make the mistake of not consulting with a professional plumbing repair company with knowledge of water filtration systems ahead of time. This has led to purchasing the wrong type of filtration system for their homes.

Water Filtration Methods

The first thing you need to determine is what type of water you have. The vast majority of water throughout the United States, and even here in Texas, is considered hard water. Hard water is full of calcium and mineral deposits that can cause scaling on pipes and faucets. In some cases, there can be excess iron in the water, along with certain unpleasant smells and tastes, depending on where you live.

Hard water is commonly found in homes that have “well water.” The other type of water you could have is soft water. This is water that has been treated using a water softener to remove the calcium and some of the minerals from hard water. If you have “city water,” then, in most cases, the water has been softened, but not always. In addition, not all “city water” has been properly filtered. Rather, it could have added chlorine and fluoride in it.

Now that you know about the different water types, the next thing you need to do is decide exactly what is it you want to remove from the water. Do you want to remove visible particles, sediment, and other such items from the water? Does the water have an odor to it you want to eliminate? Does the water have a funny taste to it you want to correct?

It is also beneficial to ask your plumber to do a water test. The water test will show exactly what is in your water, so you can use this information to further refine your filtration system for your home.

Reverse Osmosis Systems

Reverse osmosis filtration systems filter out just about everything from the water by forcing the water through a semi-pervious membrane. This membrane has very minute openings only small enough for a water molecule to pass through, removing between 90 and 99 percent of sediment, minerals, fluoride, chlorine, and more from the water. This method of water filtration can also help address concerns over odors and taste.

Plumbing Repair

Selective/Substrate Filtration Systems

This type of water filtration uses different substrates/filters to target specific containments in the water. For instance, a layer of carbon is used to remove chlorine, heavy metals, and other organic chemicals from the water. Selective/substrate filtration systems can be customized to fit your specific needs while improving the overall quality of your water. This method will leave a certain amount of minerals in the water, but they tend to cost less compared to reverse osmosis systems.

In the end, it really comes down to your needs and what it is you want to be removed from your water. To learn more about the different filtration methods, or for assistance in selecting and installing a system for your home, contact MET Plumbing at 281-599-3336 today!

House Repiping? Benefits of Repiping Your Home

Benefits of Re-piping Your Home

Pipes, just like all other things, have a service lifespan. They are designed to serve for a given period of time, and overusing them only hurts you and the house. Regardless of the quality of your house or the strength of the materials that were used to build it, your plumbing system pipes will at one point need to be replaced. If you bought an old house, such as one that was built in the early 1900s, replacing its pipes is not an option but a compulsory task. Plumbing services are unique and diverse depending on what part of the house needs repair and the material that will be used to replace old pipes.

Due to the complexity and value that your house gets after re-piping is done, it is important to hire a very experienced plumbing repair company that will first conduct a thorough plumbing inspection before establishing which pipes need to be replaced– if not all.

The numerous benefits of re-piping include:

Good water pressure in all rooms in the house

Old and leaky pipes make the water pressure fall drastically, and so do clogged pipes. For people living in areas with salty water, clogging is a rampant occurrence. Very old, corroded pipes start leaking water if not replaced early enough. To avoid this, it is important to consult an affordable plumbing consultant to give you an estimate of how much it will cost you so you can continue to enjoy that wonderful shower every morning.

Constant supply of clean water

One of the dangers of old pipes is rust because, when rust is consumed, it causes health complications. Some lead pipes used in the early 1990s release small particles of the metal in water. Lead is known as one of the most dangerous elements if consumed by human beings. Replacing such old lead and rusty pipes gives you an assurance that the water you drink or cook with is safe for your health.

Re-piping improves the value of your home

Consulting residential plumbing experts to fix all your water and gas pipes gives you a comfortable home for as long as you live there. It also adds great value to your house. You will never have some mildew growing out of your basement just because the water leaked. And, if you ever decide to sell the house, the good water pressure will be a good selling point.

Re-piping saves money that would have been used in maintenance

Leaky pipes force you to keep contacting the best plumbing companies for repairs. If this is a repeated pattern, a lot of money goes to maintenance of these pipes every year or month. Replacing all those pipes with new ones is the best course of action in this case. It reduces the insurance rates since the claims will go down as well.

Improves the general quality of life for the occupants

Living in a house that has leaking pipes, low water pressure, and even colored water from the taps that tastes awful is not a pleasant thing. In most cases, you will be forced to wake up very early so that you can shower before the rest of the house occupants start their showers lest you be late for work. You will end up buying water to drink or treating the water at your house. The leaks can also cause mold growth, which can lead to allergic reactions. With re-piping, all these problems are solved and your home becomes the resort it should always be.

Among the plumbing services that allow you to enjoy the said benefits include:

  1. Bathroom plumbingThe problem of low pressure could be due to a localized problem in the bathroom. With proper inspection, the problem can be identified and rectified individually.
  2. Toilet, shower and tub repairs: If the pipes in your house are not very old and the problem is narrowed down to either some toilet or shower pipe malfunction, then only those specific pipes should be replaced. This is efficiently done with the help of a residential plumbing
  3. Gas pipe repairs: A gas leak is one of the most dangerous forms of leaks. Your water pipes could all be intact, but the gas pipes would need to be replaced. For gas leaks, it is important to have the contacts of a 24 hour plumbing service expert in your home to tackle the leakages as soon as they are identified.

24 hours plumbing services

  1. Kitchen re-piping:The problems with poor water pressure or water having a bad taste can be the result of the kitchen plumbing system being clogged by kitchen waste as well as by pipes being too old and rusty. Some people replace these pipes in bits. It is, therefore, important to find out if your problems originate from the kitchen and solve them from there.

Remember to contact MET Plumbing at (218) 599-3336 to help re-pipe your home and to come help you clean the drains and inspect your dishwasher hookups so that you can fully enjoy the benefits that come with re-piping.

Source

  1. http://www.americashloans.com/blog/six-renovation-hacks-will-boost-your-home%E2%80%99s-value
  2. http://www.ineed2know.org/repiping.htm
  3. http://met-plumbing.com/houston-plumber/whole-house-repiping/
  4. https://www.houselogic.com/organize-maintain/home-maintenance-tips/do-you-need-replace-your-plumbing/

To Flush or Not to Flush? That Is the Question…

Our toilets can sometimes seem like magic. You turn the flush handle, the bowl fills up and whatever is inside disappears down into the sewer. But being careless about what you send down can have serious ramifications. A clogged toilet, a call to the plumber, and not to mention damage to the city’s water treatment system and the environment, are all possible outcomes.

flushing-medicationThe answer to the question of what can be flushed is very simple: human waste and toilet paper. Anything other than that should be disposed of in a trash receptacle. Here’s a list of some common and uncommonly flushed items that should NEVER be sent down the toilet.

  1. Wipes: Pre-moistened baby wipes and adult wipes may seem like good candidates for flushing, but they don’t break apart like toilet paper. This can lead to clogging and damage to sewer systems.
  2. Medication: Flushing medication may seem like a good way to get rid of it, but filtration and water treatment systems don’t always remove them, leaving them to affect water supplies and harm wildlife.
  3. Feminine Products: Tampons and pads are designed to absorb moisture, meaning they can expand and cause massive blockages in your plumbing. Make sure to throw them away.
  4. Cat Litter: This one might make sense, because it’s waste, but the particles in kitty litter are designed to suck in moisture and clump together, a perfect recipe for a clog.
  5. A Snake: Hard as it may be to believe, an Australian man was surprised one day to find a python nearly ten feet in length in his toilet! This should go without saying, but snakes or other live animals should never be flushed!

 Of course, should any clogs arise, don’t hesitate to call MET Plumbing! You’ll be glad we met!

Creepy Crawling Creatures That Can Crawl Up Your Toilet!

For most of us, the thought of skittering creatures being anywhere near our bums is pure nightmare fuel. If you’ve spent time browsing the internet, chances are you’ve seen some terrifying pictures of toilets containing uncomfortably large spiders and other unwelcome hangers-on.

Plumbing

Unfortunately, it’s not all urban legends and internet memes. The following are a few examples of real pests that can actually show up in your toilet.

Drain Flies

One of the most common bathroom drain pests is the aptly-named “drain fly,” which reproduces in stagnant water. To get rid of them, clean the toilet thoroughly, snake out any grime, and swat any remaining adults.

Rats

There have been numerous examples of rats getting into sewer pipes and escaping through a toilet. Unbeknownst to many people, rats are excellent swimmers, capable of making their way up full drains rather quickly.

Frogs

As amphibians, frogs are naturally adept at swimming. Of course, toilet drains aren’t their ideal environment. According to the Tampa Bay Times, toilet frog sightings can be prevented by putting a mesh screen over the toilet vent and leaving nearby house lights off at night.

Snakes

Just as a plumber can snake a drain, a real snake can do it, too. So long as the snake is able to get into an open sewer and swim comfortably through the system, it’s entirely plausible (though rare) to find one sitting in the bowl.

Want to know more about how to prevent and deal with unexpected toilet critters? The experts at Met Plumbing can help! Call us at (281) 599-3336 to ask questions or make an appointment.

What Causes Washing Machine Drainage Problems

Is that pesky washing machine acting up again? Don’t fret. Drainage issues are a common occurrence for these types of machines, and there are plenty of quick fixes for troubleshooting the problem. Here are a few key areas that can help you easily identify the culprit:

  1. Hose off: One of the most frequent issues related to water drainage involves the hose. If your machine is having trouble with the drainage system, make sure the hose does not have any kinks in it. If you find a kink, just straighten out the hose, and that should remedy the issue. If a problem continues to persist, try removing the hose between the bottom of the tub and the pump, and be sure to have a water pail on standby in case of spills.

Drainage system

Ever wondered where those phantom socks go after a load of laundry? There’s a good chance they wound up in the hose, which can cause clogs that prevent water from draining properly.

  1. Pump it up: Pumps can also cause all sorts of problems, so this is another key area to inspect if the hose solution doesn’t work. You should be able to hear the pump while the machine is operating. If it doesn’t make a sound, it might need to be replaced or inspected for jams.
  2. The ol’ switcheroo: Most washing machines have a sensor known as the lid switch or door switch. This switch prevents the machine from operating when the lid is open. A defective switch can cause the washing machine to encounter an error during the spin and rinse cycle.
  3. Belt it out: The drive belt is an essential component for a machine’s ability to function. Sometimes the belt simply needs to be readjusted back into its proper place. However, if the belt continues to fall out of line, this is a sign that it’s time for a replacement belt.

When in doubt, give your friends at Met Plumbing a call at 281-599-3336. Our experts are here to get your washing machine back up and running in no time.